1 
/ 15 Document
s
Added to Project
15 
/ 15 Documents Added. Remove a document to add more to your project.
2
products
Load Controllers
Sensors
Interfaces
Panels
System Management
Accessories
Climate Control
Steinel by Crestron
Legacy Controls
resources
Literature
Support
Literature
Training
Events
Tools
Partners
Articles & Case Studies
Firmware
Contact
2
Project
  • Home
  • search

Search

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Battery-Powered Wireless AV Keypad, 6-Button, 3 Sources & Power
ZUMMESH-KP10AV4BATT-A-S

An extremely slim, battery-powered wireless keypad designed to provide simple control of AV and other functions. Pairs wirelessly with the AV Bridge to enable connection to a control system or computer. Can be mounted to an electrical box or directly to any flat wall surface.

Crestron Green Light® Sensor Integration Module
GLS-SIM

Provides Cresnet® connectivity for Crestron GLS-series and third-party sensorsWorks with occupancy sensors, photocells, partition sensors, and moreProvides 24 Volts DC to power one or more sensors

Lighting Control Processor Panel, Zūm® Expanded
GLNET-ZUM-CN

Provides a convenient pre-assembled lighting control cabinet for commercial lighting applications combining Crestron Zūm® with other Crestron systems and devices.

Cresnet® Partition Sensor
GLS-PART-CN

Surface-mount partition sensor with Cresnet® power and communications.

Dual-Channel Wireless Lamp Switch, Ground Pin Down
CLW-LSWEX-2GD-W-T

Transform any standard lamp into a fully controllable Crestron® device with the CLW-LSWEX.

Power Meter Kit, 2 Phase
GLS-EM-2P-KIT

This kit includes one GLS-EM-MCU[1] Crestron Green Light® Power Meter Control Unit and two split core current transformers that work with 600 Amp feeds (model GLS-EM-CT-600A).

Terminal Block for CLXI-2DIMFLV8
CLTI-2DIMFLV8

Designed to be installed in CAEN or CAEN-MLO automation enclosures to facilitate the termination of wiring for the CLXI-2DIMFLV8 0-10 Volt 8 Channel Dimmer Module, 2 Feeds, 230 Volts.

8 Channel Dimmer Module
GLXX-2DIM8

The GLXX 2DIM8 is a Crestron Green Light Express® dimming module that features eight channels of incandescent, magnetic low voltage, 2 wire fluorescent ballast, and LED dimming. It also offers four channels of 3 wire fluorescent ballast dimming. The module is part of a complete Crestron® engineered GLPX Green Light Express dimming or switching panel.

infiNET EX® Wireless Door Sensor-B
INETS-IOEX-DOOR-BATT Series

The Crestron® INETS-IOEX-DOOR-BATT detects when a door is opened and closed using a magnetic switch. The open and closed status is sent to a Crestron control system using the ultra-reliable infiNET EX® wireless communications platform.

Blank Cover Plates for CAENIB Automation Enclosures, 5-Pack
CAENIB-BP

Designed for the CAENIB Series Automation Enclosures, these blank plates are used to fill the holes in the enclosure cover panel in front of any terminal block position that does not have a CLTIBN type circuit breaker terminal block installed. A set quantity of blank plates is included with each enclosure. The CAENIB-BP provides 5 additional blank plates and hardware.

Heating, Cooling and Relative Humidity Thermostat, Faceplate
CHV-THSTATA

The CHV-THSTAT is a versatile heating and cooling thermostat with integrated humidistat designed for one- and two- stage control of forced air, radiant, and heat pump HVAC systems. Although functional as a standalone thermostat, the CHV-THSTAT delivers greatly enhanced functionality as part of a complete home automation system from Crestron®. Available in white, black, or almond, the stylish wall mount design is a complement to any décor.

Interface DMX-512, Bi-directional
CGDMX-512BI

The CGDMX is an external serial (RS-232) to DMX-512 interface. The unit provides bi-directional control for 512 DMX channels. It is placed as master on a DMX network.

In-Wall Global scene keypad for GLPP
GLPPA-KP

Set and recall scene presets, control multiple lighting zones, toggle multiple channels, and turn on or off loads connected to a GLPP.

STEINEL Passive Infrared Wall Switch Vacancy Sensor
GLA-IR-VS

A line voltage, single relay, Passive Infrared (PIR) wall switch vacancy sensor to control lighting in commercial spaces.

Battery-Powered Wireless AV Keypad, 4-Button, 3 Sources & Power
ZUMMESH-KP10AV3BATT

An extremely slim, battery-powered wireless keypad designed to provide simple control of AV and other functions. Pairs wirelessly with the AV Bridge to enable connection to a control system or computer. Can be mounted to an electrical box or directly to any flat wall surface.

Terminal Block for CLXI-1MC4
CLTI-1MC4

The CLTI terminal blocks are designed to install in CAEN and CAENIB automation enclosures to facilitate the termination of high-voltage wiring for each CLXI-Series lighting control module. The color-coded DIN rail design, complete with printed label strips and mounting hardware, provides for a clean and simple installation. Electrical bypass jumpers on each terminal facilitate testing of each circuit and protect the module during installation. Each CLT terminal block assembly weighs approximately 0.5 lb (0.23 kg).

Heavy Duty Double Pole Relay
GLR-HD-2P

Green Light Express® modular relay Double pole switching Supports 120/208, 277/480, 230/400 Volt 3-phase applications

AV Bridge – Wireless Control Integration Module
ZUMMESH-AVBRIDGE

Interfaces a Zūm® commercial lighting system with a local AV control system (RS‑232 or USB). Allows AV system control using Zūm wireless AV keypads in a Zūm commercial room lighting system. Enables basic control of an AM-200 or AM-300 AirMedia® Presentation System using an AirMedia® Wireless Keypad.

Six Button Tree & Bezel for Zūm® Light Control Keypads (ZUMLINK‑KP)
ZUMLINK-BTN6-A

Provides multiple button configurations for Zūm® Wired ZUMLINK‑KP keypads. White, black, almond, gray, and red finishes offered with standard pad-printed labels, custom engraving or blank buttons.

SpaceBuilder® System - DIN
CL‑SPACEBUILDER‑DIN

The CL‑SPACEBUILDER‑DIN SpaceBuilder® system is great for digital lighting projects using DALI or DMX protocols. The CL‑SPACEBUILDER‑DIN SpaceBuilder system is also useful for Ethernet and Cresnet distribution.

12-Channel High‑Inrush Switch Module, Low Profile
GLXP-HSW12-LP

The Crestron® GLXP‑HSW12‑LP is a Crestron Green Light® switching module which features 12 independent channels of high‑inrush power switching with rugged, high‑current latching relays. Each channel is rated to control a 16 A lighting load or 1 HP motor.

DIN Rail 30 Watt Cresnet Power Supply, 277V
DIN-PWS30

The DIN-PWS30-277 is a 30 Watt Cresnet Power Supply module capable of operating at 277 VAC. The DIN-PWS30-277 is designed to snap onto a standard DIN rail for installation in a wall mount enclosure.

STEINEL IR Quattro Line Voltage Presence Detector, 2,000 sq ft
GLA-IR-QUATTRO-COM1-WR

A line voltage, high definition, passive infrared presence detector for lighting control with minimal movement required for human presence detection. Features four pyroelectric detectors with a high performance lens system. Choice of manual on or auto on with either momentary or maintained switch options. Light level feature provides the option to turn lights off when sufficient daylight is present.

STEINEL Ceiling Mount Outdoor Occupancy Sensor
GLA-IS-360W

A raintight indoor/outdoor occupancy sensor intended for ceiling mounting.

RGBW LED Controller
CLC-1LEDPWM-RGBW-EX

Four-channel LED controller for RGBW color mixing, wirelessly-controlled via ultra-reliable infiNET EX® communications technology. Visit the Crestron® Lighting Fixture Compatibility page to find out which Crestron lighting devices have been tested and are compatible with third party lighting fixtures.

Universal Mounting Plate for CAEN Automation Enclosures, fits 1 Module Slot
CAEN-UMP1X1

The CAEN-UMP Series is a line of four universal mounting plates designed to allow non-CLX Crestron lighting modules and third-party devices to be mounted within a CAEN or CAENIB automation enclosure (as permitted by applicable codes).

Cameo® Wireless In-Wall Dimmer/Switch Combo, 120V
CLW-DIMSWEX-P-A-S

The CLW-DIMSWEX-P is a Cameo® wireless in-wall combination dimmer/switch which features field-replaceable and engravable buttons. Able to dim one load and switch another simultaneously, the Cameo dimmer/switch is great for applications needing to control a fan and light from a single gang in the wall. infiNET EX® proven wireless communications Field replaceable buttons and bezels Designer colors Provides forward-phase dimmingVisit the Crestron® Lighting Fixture Compatibility page to find out which Crestron lighting devices have been tested and are compatible with third party lighting fixtures.

Terminal Block for CLXI-2DIMU8
CLTI-2DIMU8

Installs in a CAEN or CAENIB automation enclosure to facilitate the termination of wiring for the CLXI-2DIMU8 dimmer module.

STEINEL Fixture Integrated Sensor Module
GLA-HFLUM2-WR

A line voltage, High Frequency (HF) technology occupancy sensor module that installs in a fixture.

Crestron Green Light® Dimmer Expansion Module, Cresnet®
GL-EXP

A single-channel expansion module controlled by Cresnet®[1] or DALI that provides dimming control for many different load types including LED, incandescent, magnetic low-voltage, neon/cold cathode, or 2-wire dimmable fluorescent lighting loads.

4 Channel High-Inrush Switch Module w/Terminal Block, 4 Feeds, 120V
GL-CAEN-4HSW4-KIT

4 Channel High-Inrush Switch Module w/Terminal Block, 4 Feeds, 120V

Heating, Cooling, and Relative Humidity Thermostat, DIN Rail Mount
DIN-THSTAT

The DIN‑THSTAT is a DIN‑rail mountable heating, cooling, and relative‑humidity thermostat. The DIN‑THSTAT provides control of radiant floor heat, forced air, and heat pump HVAC systems. DIN rail mounting allows for installation in an equipment cabinet, keeping the living area free from a wall-mounted thermostat. Small, unobtrusive remote temperature and humidity sensors gather the environmental conditions from the room and transmit the data to the DIN‑THSTAT.

Lighting Network Expansion Panel w/7 PoE Ports
CLP-HUB-SW-POE-10

Provides a convenient pre-assembled lighting network expansion panel for commercial lighting applications.

15 Channel 2-Phase Current Transformer Interface
GLS-EM-CTI-2P15

The Crestron Green Light® GLS-EM-CTI is a current transformer interface designed for use with a GLS-EM-MCU Crestron Green Light Power Meter Control Unit[1]. The GLS-EM-CTI current transformer interface, in conjunction with the main control unit, facilitates monitoring of multiple branch circuits.

Zūm® Wireless Keypad, Rocker Switch, 100-277V
ZUMMESH-KP10A

An AC-powered wireless keypad for controlling Zūm® J-Box Load Controllers.

Zūm® Light Control System, Floor Hub
ZUM-FLOOR-HUB

The Crestron Zūm® Floor Hub enables centralized management and time clock for Zūm wireless commercial lighting systems. Provides a web-based user interface for easy configuration, control, monitoring, and scheduling. The time clock feature enables automation of room lighting and sensing behavior. The Zūm Floor Hub supports up to 1,000 individual rooms equipped with Zūm lighting systems. Also enables integration with other Crestron lighting systems, control systems, touch screens, shading, HVAC, and more.

Zūm® Wireless Partition Sensor
ZUMMESH-PART

Detects when a movable room partition is opened and automatically links two Zūm® lighting systems together. Faceplate sold separately.

Cameo® Wireless In-Wall Dimmer, 230V
CLW-DIMEX-230-P-A-S

The CLW-DIMEX-230-P is a Cameo® in-wall dimmer that features field-replaceable and engravable buttons. Along with the entire line of Cameo products, the CLW-DIMEX-230-P can be configured with various button layouts and designer colors, making it more versatile and affordable than previous generations of in-wall dimmers. Its streamlined, attractive design matches the entire line of Cameo dimmers, switches and keypads, making it a great addition to new or retrofit installations. Wireless infiNET EX® communication technology brings proven reliability to the CLW-DIMEX-230-P.

ENTTEC DIN-ODE POE Mk2 – Ethernet to DMX Converter
DIN-SACN-DMX

Simplifies integration between a Crestron® 3-Series® lighting control system and any DMX lighting fixture or controller. Enables distribution of DMX over Ethernet or Wi-Fi® via sACN, Art-Net, or ESP.

Cresnet Remote Temperature and Relative Humidity Sensor
C2N-RTHS

The C2N-RTHS is a wall-mounted temperature and relative humidity sensor that communicates directly with any Crestron® Control System via the Cresnet® control network. One-piece mounting makes the C2N-RTHS simple to install. The 1-1/2 inch diameter face protrudes just 1/8 inch from the wall surface and is easily painted or wallpapered to blend into the wall surface.

Wireless Passive Infrared Occupancy Sensor, infiNET EX®, Battery-Powered
GLS-OIR-CSM-EX-BATT

Crestron Green Light® sensors deliver a powerful and cost-effective solution for reducing energy costs and enhancing the functionality of lighting and environmental systems. The GLS-OIR-CSM-EX-BATT is a low-profile, battery-powered occupancy sensor designed for small areas up to 500 square feet to detect when the room is occupied.

STEINEL Wall Mount Occupancy Sensor
GLA-IS-3180-24

A passive infrared occupancy detector for controlling lights in a variety of building spaces.

STEINEL Super Duty Power Pack
GLA-TR-200

Lighting and plug load power pack that provides power to low voltage occupancy sensors and other control devices.

Passive Infrared Occupancy Sensor with Cresnet®
GLS-OIR-C-CN

A low-profile, ceiling-mounted occupancy sensor designed for large areas up to 2,000 square feet. Passive infrared motion sensing affords excellent motion-detection while also providing superior immunity to false triggering. Reliable Cresnet® connectivity allows for direct connection to a Crestron® control system for integrated control of lighting, climate control, and other devices in the room.

8 Channel Heavy Duty Switch Module
GLXX-HDSW8

Green Light Express®; Up to 8 channels of heavy duty power switching; Modular design allows adding relays when needed

Eight Button Tree & Bezel for Zūm® Light Control Keypads (ZUMLINK‑KP)
ZUMLINK-BTN8-A

Provides multiple button configurations for Zūm® Wired ZUMLINK‑KP keypads. White, black, almond, gray, and red finishes offered with standard pad-printed labels, custom engraving or blank buttons.

Zūm® Wireless J-Box Load Controller, Plug Load Switch, 20A, 100-240V
ZUMMESH-JBOX-20A-PLUG

A selection of junction box-mounted load controllers designed to provide intelligent lighting control as part of a complete Zūm® commercial lighting system.

In-wall Zone 1 Keypad for GLPP
GLPPA-KP1

Set and recall scene presets, control multiple lighting zones, toggle multiple channels, and turn on or off loads connected to a GLPP.

Zūm® Light Control System, Floor Hub with Wireless Gateway and Power Supply
ZUM-FLOOR-HUB-LIGHT

The Crestron Zūm® Floor Hub Light kit is comprised of a ZUM‑FLOOR‑HUB, a Zūm Net Wireless Gateway (ZUMNET‑GATEWAY), and a power supply (PW-2407WU) for the gateway. It is intended to facilitate quick and cost-effective configuration and setup of a centrally managed Zūm® light control system. The Crestron Zūm Floor Hub enables centralized management and time clock for Zūm® wireless commercial lighting systems. Includes a ZUMNET-GATEWAY with a dedicated power supply. Provides a web-based user interface for easy configuration, control, monitoring, and scheduling. The time clock feature enables automation of room lighting and sensing behavior. The Zūm Floor Hub supports up to 1,000 individual rooms equipped with Zūm lighting systems. Also enables integration with other Crestron lighting systems, control systems, touch screens, shading, HVAC, and more.

In-Wall 0-10V Dimmer, 230VAC
CLWI-DIMFLVEX-ANTH

The CLWI-DIMFLVEX delivers native Crestron® control to 0-10V dimmable fixtures or switched loads in new or retrofit 230 Volt applications. It features engravable and field-customizable buttons and wireless infiNET EX® communications. Visit the Crestron® Lighting Fixture Compatibility page to find out which Crestron lighting devices have been tested and are compatible with third party lighting fixtures.

Heating/Cooling Fan-Coil Thermostat
CHV-TSTAT-FCU-A

The CHV-TSTAT is a versatile heating and cooling thermostat for fan-coil unit HVAC systems.

In-wall Zone 3 Keypad for GLPP
GLPPA-KP3

Set and recall scene presets, control multiple lighting zones, toggle multiple channels, and turn on or off loads connected to a GLPP.

8 Channel Dimmer Module, 2 Feeds, 120V
CLX-2DIM8

As part of a complete Crestron® lighting system, the CLX-2DIM8 lighting control module provides 8 channels of dimming for incandescent, magnetic low-voltage, neon/cold cathode, and dimmable 2-wire fluorescent loads. The CLX-2DIM8 is actually composed of two independent 4 channel dimmers in a single module. Each channel is rated for 1920 Watts, with a total module rating of 3840 Watts when fed from two separate 20 Amp feeds. Air-gap relays are provided on every channel output allowing individual circuits to be serviced without disabling the entire module.Visit the Crestron® Lighting Fixture Compatibility page to find out which Crestron lighting devices have been tested and are compatible with third party lighting fixtures.

Rocker Button & Bezel for Zūm® Light Control Keypads (ZUMLINK KP), Engraved or pad printed
ZUMLINK-BTNR-W-ENGRAVED

Provides multiple button configurations for Zūm® Wired ZUMLINK‑KP keypads. White, black, almond, gray, and red finishes offered with custom engraving or blank buttons.

STEINEL IR Presence Detector, 4,000 sq ft
GLA-IR-QUATTRO-HD

A low voltage, high definition, passive infrared presence detector for lighting control with minimal movement required for human presence detection. Features four pyroelectric detectors with a high performance lens system. Choice of manual on or auto on with either momentary or maintained switch options. Light level feature provides the option to turn lights off when sufficient daylight is present.

Power Loss Sensor, 3-Phase, 120 or 277 Volts
GLS-PLS-120/277

Senses loss of power on each leg of a 3-phase feedUsed to satisfy UL 924 (Emergency Power Equipment) requirementsWorks with 120 or 277 Volt feeds

Crestron Green Light® Power Meter Control Unit
GLS-EM-MCU

Main control unit for power metering up to 3-phase 347 Volt service and 84 branch circuits.

Universal Phase In-Wall Dimmer, 230VAC
CLWI-DIMUEX-ANTH

The CLWI-DIMUEX delivers Crestron® dimming control to any light in new or retrofit 230 Volt applications. It features engravable and field-customizable buttons, wireless infiNET EX® communications, and connectivity for third party remote switches. Visit the Crestron® Lighting Fixture Compatibility page to find out which Crestron lighting devices have been tested and are compatible with third party lighting fixtures.

Zūm® Wired J-Box Controller for DALI® , 120-277V with Net and Link Communication
ZUMNET-JBOX-DALI

A Zūm® Wired junction box-mounted DALI load controller with Zūm® Net communication designed to provide intelligent lighting control as part of a complete Zūm wired commercial room lighting system.

8 Channel 0-10V Dimmer Module w/Terminal Block, 2 Feeds, 120V or 277V
GL-CAEN-2DIMFLV8-KIT

8 Channel 0-10V Dimmer Module w/Terminal Block, 2 Feeds, 120V or 277V

Lighting Network Expansion Panel w/Ethernet-to-Cresnet® Bridge, 2 Cresnet Subnets, & 3 PoE Ports
CLP-HUB-SW-POE-5

Provides a convenient pre-assembled lighting network expansion panel for commercial lighting applications.

Zūm® Battery-Powered Wireless Keypad, 6-Button w/Sensor Control,
ZUMMESH-KP10DBATT

An extremely slim, battery-powered wireless keypad for controlling Zūm® J-Box Load Controllers. Can be mounted to an electrical box or directly to any flat wall surface.

Automation Enclosure, 3 modules high x 1 module wide, 6 breaker slots, split phase
CAEN-3X1-MLO-120/2P

Provides a professional centralized dimming solution for residential and commercial applications.CAEN-5X1-MLO shown. Circuit breakers, modules, and terminal blocks sold separately.

8 Channel Universal Dimmer Module, 2 Feeds, 120V
CLX-2DIMU8

Provides eight channels of technologically advanced universal dimming for 120 Volt residential and commercial lighting applications. Supports LED, incandescent, magnetic low-voltage, electronic low-voltage, and 2-wire dimmable fluorescent lighting loads. Installs in a CAEN or CAEN-MLO wall mount automation enclosure as part of a complete Crestron® centralized lighting control system.

High-Voltage FCU Thermostat Interface, 120V
DIN-TSTATIM-FCU-120

Enables a Crestron® FCU type thermostat to control a 120 Volt Fan Coil Unit HVAC system.

Horizon™ In-Wall Switch with infiNET EX® Wireless Communication, 120 VAC
HZ-SWEX Series

The HZ‑SWEX is a Horizon™ in‑wall switch that controls incandescent, magnetic low voltage, and tungsten‑halogen loads as well as electronic ballasts and 1/2 HP motors. Its design matches the entire line of Horizon dimmers, switches, and keypads, making it a great addition to new or retrofit installations. Faceplate Sold Separately

Zūm® Battery-Powered Wireless Keypad, 6-Button,
ZUMMESH-KP10CBATT

An extremely slim, battery-powered wireless keypad for controlling Zūm® J-Box Load Controllers. Can be mounted to an electrical box or directly to any flat wall surface.

Passive Infrared Ceiling Mount Occupancy Sensor
GLS-OIR-C-NS

A low-profile, ceiling-mounted occupancy sensor designed for large areas up to 2,000 square feet. Passive infrared motion sensing affords excellent motion-detection while also providing superior immunity to false triggering. Reliable Cresnet® connectivity allows for direct connection to a Crestron® control system for integrated control of lighting, climate control, and other devices in the room.

Horizon™ In-Wall 0-10 V Dimmer with infiNET EX® Wireless Communication, 120 VAC
HZ-DIMLVEX Series

The HZ‑DIMLVEX is a Horizon™ in‑wall 0‑10 V dimmer that controls ballasts and drivers. The device also has an integrated switch to cut load power. Its design matches the entire line of Horizon dimmers, switches, and keypads, making it a great addition to new or retrofit installations.  Faceplate Sold Separately

Zūm® Battery-Powered Wireless Keypad, Rocker Switch
ZUMMESH-KP10ABATT

An extremely slim, battery-powered wireless keypad for controlling Zūm® J-Box Load Controllers. Can be mounted to an electrical box or directly to any flat wall surface.

Zūm® Wireless J-Box Load Controller, 0-10V Dimmer, 5A, 100-277V
ZUMMESH-JBOX-5A-LV

A selection of junction box-mounted load controllers designed to provide intelligent lighting control as part of a complete Zūm® commercial lighting system.

STEINEL Corner Mount Presence Detector
GLA-CM

Utilizes passive infrared and ultrasonic technologies to detect the presence of a person in a space. Lighting loads are controlled in relation to both presence detection and ambient light levels.

SpaceBuilder® System - GLEX FT
CL‑SPACEBUILDER‑GLEX‑FT

The CL‑SPACEBUILDER‑GLEX‑FT SpaceBuilder® system is a quickly configured and shipped feed-through panel solution that is great for spaces that do not have accessible ceilings such as auditoriums, warehouses, sports venues, and large parking structures. The CL‑SPACEBUILDER‑GLEX‑FT is a quickly configured and shipped feed-through panel solution that supports very large spaces. Combine with the CL‑SPACEBUILDER‑PANELTRIM finish kit for a complete turn‑key centralized lighting control solution.

STEINEL 0-10 V Dimming Ultrasonic Wall Switch Occupancy Sensor
GLA-US-WLS-DIM

A line voltage, Ultrasonic (40 kHz) wall switch occupancy sensor with 0-10 volt dimming capability intended to control lighting in commercial spaces.

Zūm® Net Wireless Gateway for Zūm Light Control System
ZUMNET-GATEWAY

Enables wireless communication between a Zūm® Floor Hub and a network of Zūm Network Bridges.

Crestron Green Light® Power Pack, 2-Channel 0-10V Dimmer w/Cresnet® & Built-in Power Monitoring
GLPP

Make more rooms green with the Crestron Green Light® Power Pack. This low-cost, intelligent lighting system controls lights based on the occupancy and available natural light in any room.

Zūm® Wireless Keypad, 4-Button, 100-277V
ZUMMESH-KP10B

An AC-powered wireless keypad for controlling Zūm® J-Box Load Controllers.

STEINEL Dual Technology Wall Switch Occupancy Sensor
GLA-DT-WLS

A line voltage, single relay, Dual Technology (PIR & ultrasonic) wall switch occupancy sensor to control lighting in commercial spaces. The photocell daylight option will keep the lighting load OFF when the light level is greater than the threshold level setting.

Adhesive Label for Glass Mounted Zūm® Wireless Keypads
ZUMMESH-KP-BATT-LM Series

The ZUMMESH‑KP‑BATT‑LM conceals the back of a Zūm® Wireless Keypad (ZUMMESH‑KP‑BATT) when it is mounted to a transparent glass surface.

SpaceBuilder® System - CAEN FT
CL‑SPACEBUILDER‑CAEN‑FT

The Crestron® CL‑SPACEBUILDER‑CAEN‑FT SpaceBuilder® system is ideal for spaces where distributed or wireless controls are not appropriate. CL‑SPACEBUILDER‑CAEN‑FT is great for spaces that do not have accessible ceilings such as auditoriums, warehouses, sports venues, and large parking structures. The CL‑SPACEBUILDER‑CAEN‑FT is a quickly configured and shipped feed‑through panel solution that supports all analog dimming loads. Configure and order the CL‑SPACEBUILDER‑CAEN‑FT SpaceBuilder® system at www.crestron.com/spacebuilder.

Zūm® Wireless 0-10V Wall-Box Dimmer, 5A, 100-277V
ZUMMESH-5A

A wireless wall-box dimmer for 100-277 Volt load control of 0-10 Volt 4-wire LED drivers or fluorescent ballasts in a Zūm® commercial room lighting system.

Terminal Block for CLX-PWS75
CLT-PWS75

The CLT terminal blocks are designed to install in CAEN automation enclosures to facilitate the termination of Class 1 high-voltage wiring for each CLX-Series lighting control module. The color-coded DIN rail design, complete with printed label strips and mounting hardware, provides for a clean and simple installation. Each CLT terminal block assembly weighs approximately 0.5 lb (0.23 kg).

Dual-Technology Ceiling Mount Occupancy Sensor
GLS-ODT-C-NS

A low-profile, ceiling-mounted occupancy sensor designed for large areas up to 2,000 square feet. Dual-technology motion sensing affords extreme motion-detection reliability. 

Battery-Powered Wireless AV Keypad, 4-Button w/Custom Engraving
ZUMMESH-KP10AV5BATT-ENGRAVED

An extremely slim, battery-powered wireless keypad designed to provide simple control of AV and other functions. Pairs wirelessly with the AV Bridge to enable connection to a control system or computer. Can be mounted to an electrical box or directly to any flat wall surface.

STEINEL Momentary Switch, 1 Button
GL-GN

Wall mount switches with up to three large momentary buttons for use with low-voltage controllable STEINEL lighting products.

Zūm® Wired Keypad with Link Communication, Rocker Button
ZUMLINK-KP-R-W

A white rocker keypad designed for a selection of Zūm® Link devices junction box-mounted load controllers to provide intelligent lighting control as part of a complete Zūm Wired commercial room lighting system.

STEINEL Power Pack
GLA-TR-100

Provides power to STEINEL low voltage occupancy sensors and other control devises. Contains a Mode Switch to select either manual ON or automatic ON operation.

Remote Slab Sensor and Outdoor Temperature Sensor
CHV-RSS

The CHV-RSS is a remote temperature sensor designed for use with select Crestron® thermostats. Ideally suited for concrete slab, under floor, or any outdoor installation, the CHV-RSS is an extremely accurate temperature sensor potted within a rugged, waterproof stainless steel sleeve.

STEINEL Dual Technology Vacancy Sensor
GLA-DT-VS

A line voltage, single or dual relay, Dual Technology (PIR & ultrasonic) vacancy sensor to control lighting in commercial spaces.

STEINEL 0-10 V Dimming Dual Technology Wall Switch Occupancy Sensor
GLA-DT-WLS-DIM

A line voltage, Dual Technology (PIR & ultrasonic) wall switch occupancy sensor with 0-10 volt dimming capability intended to control lighting in commercial spaces.

Wireless Lighting and Fan Controller
CLC-FANDELVEX-W

Settable 3-speed fan control and a full range of incandescent and electronic low-voltage dimming control for ceiling fans with attached lighting. Built with the ultra-reliable infiNET EX® wireless communications technology. Visit the Crestron® Lighting Fixture Compatibility page to find out which Crestron lighting devices have been tested and are compatible with third party lighting fixtures.

DIN Rail Universal Dimmer, 1 feed, 4 channels
DIN-1DIMU4

4 channels of forward or reverse phase dimmingAuto load detection120 to 240 Volt 50/60 Hz operationVisit the Crestron® Lighting Fixture Compatibility page to find out which Crestron lighting devices have been tested and are compatible with third party lighting fixtures.

Automation Enclosure, 1 module high x 1 module wide
CAEN-1X1

Designed to house the Crestron® CLX Series lighting control modules, CLX-DIN-AP3 3-Series Control System®, or PAC2M control system. CAEN enclosures are available in an assortment of sizes, and are suitable for surface or flush wall-mount installation. Each model has been engineered to provide a clean and manageable installation and has abundant provisions for wire termination and electrical knockouts.

Battery-Powered Photosensor with infiNET EX®, Dual-Loop
GLS-LDL-EX-BATT

A battery-powered, wireless, dual-loop photosensor designed to provide superior sensing of natural light and control of indoor light in daylight harvesting applications.

Ceiling Mount Passive Infrared Occupancy & Daylight Sensor, Cresnet®
GLS-OIRLCL-C-CN

Provides an occupancy or vacancy sensor with built-in closed-loop photosensor for Crestron® systems. Enables customizable automation of lighting, HVAC, and other systems based on room occupancy, vacancy, and ambient light level. Enables room usage monitoring for Crestron Fusion®. Reduces wasteful energy consumption and enhances system functionality. Miniaturized flush ceiling mount design affords a nearly hidden appearance and quick installation.

STEINEL 0-10 V Dimming Ultrasonic Wall Switch Vacancy Sensor
GLA-US-VS-DIM

A line voltage, Ultrasonic (40 kHz) wall switch vacancy sensor with 0-10 volt dimming capability intended to control lighting in commercial spaces.

STEINEL Extender Module
GLA-EM1

Installation accessory for high bay occupancy sensors.

Cameo® In-Wall Universal Phase Dimmer, 120 VAC
CLW-DIMUEX-P-A-S

The CLW-DIMUEX-P is a Cameo® in-wall universal phase dimmer that controls LED, incandescent, magnetic low voltage, and electronic low voltage loads. Its design matches the entire line of Cameo devices, making it a great addition to new or retrofit installations.

Zūm® Wireless J-Box Controller For DALI® , 120-277V
ZUMMESH-JBOX-DALI

The Zūm® Wireless ZUMMESH‑JBOX‑DALI is a single‑channel DALI controller capable of controlling up to 64 DALI compatible drivers. The ZUMMESH‑JBOX‑DALI communicates with other Zūm devices such as keypads, occupancy sensors, vacancy sensors, and daylight sensors. Zūm Mesh wireless technology affords easy pair and play integration as part of a complete Zūm commercial lighting system. Energy‑saving options are available to enable daylighting, occupancy or vacancy sensing, HVAC system integration, and centralized monitoring and management.

STEINEL Corridor Occupancy Sensor
GLA-IS-345-24

A passive infrared occupancy detector that features a specially designed detection lens for controlling lights in long corridors or aisleways.

Previous
Next

Crestron creates world-class commercial lighting control solutions that utilize leading-edge technology for scalable, reliable lighting control.

Find an Agent

Products

Load Controllers
Sensors
Interfaces
Panels
System Management
Accessories
Climate Control
Steinel by Crestron
Legacy Controls

Resources

  • Literature
  • Technical SupportTraining EventsToolsLiteraturePartnersArticles & Case Studies

Support

  • 855.644.7643
  • clclighting@crestron.com

©

 Crestron Electronics, Inc.

All brand names, product names and trademarks are the property of their respective owners. Certain trademarks, registered trademarks, and trade names may be used to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice.

  • Patents
  • Legal
  • Crestron Europe Terms
  • Privacy Policy
  • Terms of Use