The Cameo® Standard Mount Keypad (C2N-CBD-P) from Crestron® presents a fresh, innovative concept in keypad design, featuring a highly configurable one-gang wall mount form factor. The C2N-CBD-P easily installs alongside other low-voltage in-wall devices to deliver an advanced custom keypad control solution as part of a complete Crestron control system.
Simple yet highly customizable, a single Cameo Keypad can be configured easily by the installer to provide from two to eight buttons. Each keypad is furnished with an assortment of button caps in four different sizes to support a variety of physical layouts. Button caps may also be ordered with custom backlit laser engraving1 to clearly designate each button's function.
Through programming, each button can be configured for up to three separate functions. In addition, shift key functionality is possible, allowing any button to be held while pressing another to provide further customization for the keypad.
High-quality backlit laser engraving1 provides customizable button text that's easy to read under any lighting condition. A built-in light sensor controls the backlight intensity automatically to achieve crisp, legible text in both darkened and fully lit rooms.
Enhanced LED Feedback
Six pinhead-sized white LEDs provide fully customizable feedback to show the status of each button. Ten flash patterns are built in, enabling flashing LED feedback with simplified programming and reduced traffic on the Cresnet® network. Onboard bar graph logic allows the feedback LEDs to function as a 6-segment bar graph display, providing clear level indication when adjusting lighting and audio settings. Auto-dimming LED intensity ensures optimal visibility under varying lighting conditions.
Ambient Light Sensor
In addition to controlling the backlight and LED intensity, the built-in light sensor can also be utilized by the control system to support basic daylight harvesting and other programmatic functions.
Two digital/analog input ports onboard the C2N-CBD-P provide a local interface for a range of devices including the Crestron GLS Series Occupancy Sensors and Photosensors or any device providing a contact closure, DC logic, or 0-10 VDC. Using the control ports, it's possible to add monitoring of room occupancy, ambient light level, door closures, and other conditions without having to home run extra wiring to the central equipment location.
Cresnet® Wired Communications
The Cresnet bus is the communications backbone for many Crestron keypads, lighting controllers, shade motors, sensors, and other devices. Cresnet is a simple, yet flexible 4-wire network that provides bidirectional communication and 24 VDC power for Cresnet devices. Cresnet supports up to 252 keypads and other devices.
Standard Wall Mount
Cameo Standard Mount Keypads are designed for installation in a standard electrical wall box, making them perfect for installation in a multi-gang box alongside other low-voltage devices. Available in a selection of 12 colors with smooth or textured finishes, Cameo Keypads match popular off-the-shelf decorator-style faceplates.
This product may be purchased from select authorized Crestron dealers and distributors. To find a dealer or distributor, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/How-To-Buy/Find-a-Representative or by calling 855‑263‑8754.
This product is covered under the Crestron standard limited warranty. Refer to www.crestron.com/warranty for full details.
The specific patents that cover Crestron products are listed online at patents.crestron.com.
Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.
Crestron, the Crestron logo, Cameo, and Cresnet are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2020 Crestron Electronics, Inc.
Keypad Buttons: Configurable for 2 to 8 single-action pushbuttons
Button Events: Programmable for Normal, Tap, Double-Tap, and Press and Hold
Button Caps: Includes (2) large, (3) medium, (5) small, and(2 pair) split small button caps; All button caps are blank; Custom-engraved, backlit button caps are available separately
Backlight: White LED backlight for button engraving; Software-adjustable intensity, auto-dimmable
Feedback: (6) White LEDs, one per each of 6 small button positions; Programmable, auto-dimmable, software adjustable intensity, 10 flashing patterns
Bar Graph: (1) 6-segment bar graph display utilizing the feedback LEDs
Photosensor for control of auto-dimming function; Can be configured to report ambient light level to control system
NET: 4-pin 3.5mm detachable terminal block; Cresnet slave port, connects to Cresnet control network
INPUT 1-2: (1) 3-pin 3.5mm detachable terminal block comprising (2) digital/analog input ports (referenced to GND); Digital Input: Rated for 0-24 VDC, input impedance 200k Ohms, logic threshold 1.24VDC; Analog Input: Rated for 0-10 VDC, protected to 24 VDC maximum, input impedance 200kOhms; Programmable 5 V, 2k Ohms pull-up resistor per pin
Cresnet Power Usage: 1 W (0.05 A @ 24 VDC)
Temperature: 32° to 113° F (0° to 45° C)
Humidity: 10% to 90% RH (non-condensing)
Heat Dissipation: 3.4 BTU/Hr
Mounting: Mounts in a 1-gang or larger electrical box or mud ring
Faceplates: Requires a decorator-style faceplate
Height: 4.13 in. (105 mm) without faceplate
Width: 1.75 in. (45 mm) without faceplate
Depth: 1.19 in. (31 mm) without connector
2.3 oz (64 g)