No items found.

Zūm Wired Universal Phase Control Dimming Module

ZUMLINK-EXP-16A-DIMU

The ZUMLINK-EXP-16A-DIMU is a single-channel universal dimmer module designed to control a wide range of dimmable lighting load types.

Buy now

Key Features

Universal phase dimming is now supported natively in the ZŪM ecosystem. The 16 Amp dimming module supports forward and reverse phase loads. The load controller connects easily to the ZUMLINK network, commissions directly from the ZŪM App, and supports management by the ZŪM Hub. This addresses a need for a light dimming control feature for specialty fixtures used in hotels, building lobbies, restaurants etc., such as unique/custom chandeliers.

Universal phase dimming features:

  • 120-277VAC – 16A max
  • FWD and REV phase options
  • (2) ZUMLINK RJ45 connections
  • Supported natively by Zūm App
  • Can be configured as primary or secondary
  • Passes ZUMLINK power but does not supply power

Product Overview

The ZUMLINK-EXP-16A-DIMU is a single-channel universal dimmer module designed to control a wide range of dimmable lighting load types. Using proprietary zero-cross filter technology, the ZUMLINK-EXP-16A-DIMU provides superior immunity to power line noise, resulting in a dramatic reduction of lamp flicker. Energy-saving options (sold separately) are available to enable daylighting, occupancy or vacancy sensing, integration, and centralized monitoring and management

Product Specs

Load Control

Dimmer Channels: 1

Load Rating: 16A

Line/Load Voltage: 100-277VAC, 50/60 Hz

Dimmable Load Types: Incandescent, LED, electronic low-voltage, magnetic low-voltage, neon/cold cathode, 2-wire fluorescent

Communications

Zūm Link in-room control

Connections

ZUMLINK: (2) RJ-45 orange ports; In-room Zūm Link device daisy-chaining 

24V, OCC, GND: Occupancy sensor input; 85mA available output current; Spring clamp connector 

24V, PHO, GND: Photo sensor input; Spring clamp connector 

OVR, GND: Override control input; Spring clamp connector 

NEUT: (3) Captive screw terminals; Neutral connections for feed and load; 24 to 10 AWG (0.25 to 4.0 mm2) wire size 

LINE: (2) Captive screw terminals; Line power feed input and pass-through; 24 to 10 AWG (0.25 to 4.0 mm2) wire size 

LOAD: (1) Captive screw terminal; Dimmed load output; 24 to 10 AWG (0.25 to 4.0 mm2) wire size 

Ground: (1) 3-terminal grounding block

Dimensions

Height 8.80 in. (223 mm)

Width 6.40 in. (162 mm)

Length 3.17 in. (80 mm)

Did you find what you are looking for?
Find an Agent
Text Link
Forward Phase
Text Link
Reverse Phase
Text Link
Universal Phase