The Crestron® Zūm® Wired ZUMLINK‑CONV‑CN adapter cable allows Zūm wired devices with Zūm Link communication to integrate via Cresnet® for legacy controls. The plenum-rated adapter converts a single female RJ-45 Zūm Link port connection to use on the Cresnet network. Cresnet screw terminals provide a contact closure input with the ability to trigger Zūm devices into Emergency Override mode. For flexible in-room wiring, daisy chain Zūm Link with the ZUMLINK‑SPLTR‑RJ45 RJ-45 splitter to avoid dead ends.
Zūm Link Wired Technology
Zūm Link technology enables in‑room lighting control through keypads and sensors wired to controllers. Zūm Wireddevices connect via CBL‑CAT5E‑ZUMLINK‑P CAT5e cable (sold separately) to provide daisy-chaining and lighting control of compatible loads.
Cresnet Wired Network
The ZUMLINK‑CONV‑CN uses the dependable Cresnet wired network for communication between devices. The Cresnet bus offerseasy wiring and configuration, carrying bidirectional communication and 24VDCpower to each device over a simple 4‑conductor cable.
Cresnet Terminal Block: (1) 4-pin captive screw terminal block
24: 24V power
Y: Data terminal pass-through only
Z: Data terminal pass-through only
Emergency Override Terminal Block: (1) 4-pin captive screw terminal block
24: 24V power
O: Emergency override
W: Future use
ZUM LINK RJ-45: (1) female RJ-45 Zūm Link port
Conductors: 24 AWG solid copper
Insulation: FEP, 0.005 in. nominal thickness
Outer Jacket Color: Orange; plenum rated
Cable length: 6 in. (152 mm), excluding the connectors
Zūm® Wired Adapter Cable for Cresnet® Devices