The CLW-DIMEX-230-P is a Cameo® in-wall dimmer that features field-replaceable and engravable buttons. Along with the entire line of Cameo products, the CLW-DIMEX-230-P can be configured with various button layouts and designer colors, making it more versatile and affordable than previous generations of in-wall dimmers. Its streamlined, attractive design matches the entire line of Cameo dimmers, switches and keypads, making it a great addition to new or retrofit installations. Wireless infiNET EX® communication technology brings proven reliability to the CLW-DIMEX-230-P.
Field-Replaceable Button Faces
Like their cousin Cameo keypads, the buttons on the CLW-DIMEX-230-P can be swapped in the field, making it easy to change engraving or color after installation. The rocker controller brings a familiar user interface to the Crestron® in-wall dimmer, while the versatility of up to four buttons takes advantage of prime single-gang wall box real estate. Use buttons to control in-room audio or lamps in addition to any other light connected to the system. The comprehensive list of designer colors blends the CLW-DIMEX-230-P into virtually any décor and style, suiting even the most exquisite space.
Because the CLW-DIMEX-230-P is attached to the Crestron network, it can also function as a keypad, sending commands to trigger whole-room lighting scenes or distributed audio functions. Supporting up to four buttons, the in-wall dimmer serves as a great user control interface in any Crestron system. Its single-gang form factor maximizes control capability in a small space while increasing the opportunity for Crestron control in every room.
Ultra-reliable infiNET EX wireless technology provides steadfast two-way RF communications throughout a residential or commercial structure without the need for physical control wiring. Employing a 2.4 GHz mesh network topology, each infiNET EX device functions as an expander, passing command signals through to every other infiNET EX device within range (approximately 150 feet or 46 meters indoors), ensuring that every command reaches its intended destination without disruption.
The CLW-DIMEX-230-P communicates with a Crestron control system via an infiNET EX Wireless Gateway (model CEN-RFGW-EX, DIN-AP3MEX, or MC3). Up to 100 infiNET EX devices may coexist on a single wireless network, and every device that is added to the network effectively increases the range and stability of the entire network by providing multiple redundant signal paths.
The CLW-DIMEX-230-P supports dimming control of the same lights from more than one location. Easily replace existing dimmers and switches wired in a traditional three- or four-way circuit with dim control from every location, or design new projects to accommodate remote dimmers wherever desired. The CLW-SLVU-230-P remote dimmer/switch simply connects to the "traveler" wire and dims the load attached to the CLW-DIMEX-230-P.
This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.
The specific patents that cover Crestron products are listed online at: patents.crestron.com.
Crestron, the Crestron logo, Cameo, and infiNET EX are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2014 Crestron Electronics, Inc.
Incandescent/Tungsten Halogen/Magnetic Low Voltage: 1000 W/VA;
Minimum Load: 25 Watts (with dedicated neutral connected); 50 Watts (no dedicated neutral)
230 Volts AC, 50/60Hz, line power
Button 1-4: Configurable for 1 to 4 single-action push buttons, programmable via control system
Dimming Ramp Rate: 5 seconds (default), software adjustable 0.01 to 10seconds
Preset Fade Time: 2 seconds (default), software adjustable 0.01 to 120 seconds
Feedback: (7) White LEDs
Bargraph: (1) 7-segment bargraph display utilizing the 7 feedback LEDs
RF Transceiver: infiNET EX® 2-way RF, 2.4 GHz ISM Channels 11-26 (2400to 2483.5 MHz), default channel 15; IEEE 802.15.4 compliant
Range (typical): 150 ft (46 m) indoor, 250 ft (76 m) outdoor to nearest mesh network device(s); subject to site-specific conditions and individual device capabilities
Gateway: Requires an infiNET EX gateway
Line: Brown wire, 1.5mm2 (16 AWG)
Remote: Yellow wire, 1.5mm2 (16 AWG)
Load: Red wire, 1.5mm2 (16 AWG)
Neutral: Blue wire, 1.5mm2 (16 AWG)
Ground: Green/Yellow wire, 1.5mm2 (16 AWG)
Temperature: 32° to 104°F (0° to 40°C)
Humidity: 10% to 90% RH (non-condensing)
1-gang mountable in a 3-1/2 inch (89 mm) deep electrical box;
Requires decorator style faceplate (not included)
Height: 4.13 in (105 mm)
Width: 1.75 in (45 mm)
Depth: 1.75 in (45 mm)
4.9 oz (139 g)