The ZUMMESH-OD-7P is a wireless network-connected lighting controller with dimming, energy-metering, remote monitoring and management, and sensor input capabilities. A single ZUMMESH-OD-7P has sensor inputs for both occupancy and daylight sensors and can provide 12VDC power to the sensors. It has 4kV fault tolerance and control persistency. The status and health of the light fixtures are continuously monitored. The 7-pin (ANSI 136-41) dimming (NEMA) receptacles provide for a quick and simple installation.
Zum® Outdoor Wireless Mesh Network
Zūm outdoor wireless mesh technology provides peer-to-peer RF communications within a commercial space without the need for physical control wiring, hubs, or gateways. Zūm mesh outdoor devices act as routing nodes to relay wireless commands between them without disruption. Adding Zūm mesh devices to a space increases the range and stability of the peer-to-peer mesh network by providing multiple redundant signal paths. Each Zūm mesh device autonegotiates its RF channel to provide robust communication.
Self-Forming and Self-Restoring Wireless Mesh Network
Zūm outdoor wireless mesh technology auto-searches and establishes connections in a network. If a wireless connection in the network is broken, the Zūm mesh device will disable the path and reroute the data to ensure seamless communication. Once the device is restored, the Zūm device will automatically rejoin the network.
Built-in Power Monitoring
Power monitoring tracks the real time energy usage of each node in the system to help control energy costs. By analyzing real data, organizations can make more educated decisions regarding the energy usage.
Daylight and Motion Sensor Inputs
Daylight and Motion Sensor inputs enable the use of hardwired occupancy and daylight sensors with a Zūm commercial lighting system. The sensor enables the use of ultrasonic and dual-technology type sensors for outdoors. One or more motion-detecting sensors can be connected and configured to operate in either occupancy or vacancy-only mode. A single photocell can also be connected to support daylight harvesting.
Linear Continuous Dimming – High-Resolution Dimming (100+ steps)
Linear continuous dimming provides one channel of dimming for commercial lighting applications. Supports a continuous dimming range of 1% to 100%.
Voltage: 277VAC Models: 120-277VAC (+/- 10%)
480VAC Models: 347-480VAC (+/- 10%)
Dimming Output: (1) 0-10V, 20mA
Max Load Current: 277VAC Models: 10A 480VAC Models: 5A
Surge Protection (Controller only): 4kV (Lighting load protection provided by lighting load's circuit breaker)
RF Transceiver: Zum Outdoor wireless, 2-way RF, 2.4 Ghz
Topology: Mesh topology
Device Type: Node; Routes data between nodes and gateway
Coverage Range (typical): Gateway to Node: 2,000 ft (610 m);
Node to Node: 2,000 ft (610 m) Maximum of 10 hops on the mesh network between the Gateway and the last node
7-Pin Connector: (1) 7-pin NEMA connector; Connects to ANSI 136-41 receptacle;
Load: Load, Red wire;
L: Line, Black wire;
N: Neutral, White wire;
Pin 1: Dimming -, Gray wire;
Pin 2: Dimming +, Violet wire;
Pin 3: Sensor input, Orange wire;
Pin 4: Sensor Input, Brown wire
Temperature: -40° to 122° F (-40° to 50° C)
Humidity: 5% to 95% RH (noncondensing)
Material: Plastic, IP67 rated
Mounting: NEMA-rated 7-pin
Height 2.5 in. (64 mm)
Width ⌀4.6 in. (116 mm)
Depth ⌀4.6 in. (116 mm)
0.835 lb (0.378 kg)
Regulatory Model: M202217004 FCC, DLC
To search for product certificates, refer to support.crestron.com/app/certificates.