The Crestron® Battery-Powered Wireless AV Keypad (ZUMMESH-KPAVBATT) can be mounted virtually anywhere to enable simple control of AV and other functions through integration with a control system or computer. Its slim design allows it to be attached directly to any suitable flat surface using screws or two-sided adhesive tape. It can also be mounted to a standard electrical box. One or more keypads can be mounted together, or alongside other decorator-style devices, and finished with an FP-G series faceplate (sold separately).
The ZUMMESH-KPAVBATT is battery powered and completely wireless. It can operate for five years or more on a single lithium coin cell battery (included). Connection to the control system or computer is facilitated using an AV Bridge (ZUMMESH-AVBRIDGE). No other wireless gateway is required. Zūm™ Mesh peer-to-peer wireless technology affords reliable operation with easy “pair and play” setup. Up to eight keypads can be paired with a single AV Bridge.[1,2]
The ZUMMESH-KPAVBATT is available with either four or six buttons, which may be ordered with custom button engraving  or pre-labeled for basic power, source selection, and volume control. Each button can be assigned to control any system function via the control system program or computer program.
The ZUMMESH-KPAVBATT is ideal for expanding the capabilities of a Zūm commercial lighting system to add control of AV and other system functions. Installed alongside Zūm lighting keypads and wall-box dimmers, they afford a cohesive appearance for every control on the wall.
Controls & Indicators
Buttons (-KP10AV1BATT models): (4) Pushbuttons as follows: ON, AIRMEDIA, LAPTOP, OFF
Buttons (-KP10AV2BATT models): (6) Pushbuttons as follows: ON, , , AIRMEDIA, LAPTOP, OFF
Buttons (-KP10AV3BATT models): (4) Pushbuttons as follows: POWER, AIRMEDIA, LAPTOP, CABLE/SAT
Buttons (-KP10AV4BATT models): (6) Pushbuttons as follows: POWER, , , AIRMEDIA, LAPTOP, CABLE/SAT
Buttons (-KP10AV4BATT ENGRAVED models): (6) Pushbuttons with custom engraving
Buttons (-KP10AV5BATT ENGRAVED models): (4) Pushbuttons with custom engraving
Buttons are assignable to any function via the control system program; also used for room setup and factory reset
Feedback: (1) Bi-color LED, green indicates a button press, red indicates a low battery condition when a button is pressed; also used for room setup and factory reset
RF Transceiver: Zūm Mesh 2-way RF, 2.4 GHz ISM Channels 15, 20, 25, or26 (channel auto-selected), IEEE 802.15.4 compliant, AES-128 encryption
Range: 50 ft (15 m) to nearest peer-to-peer mesh network device(s), subject to site-specific conditions and individual device capabilities
Note: A maximum of 32 Zūm Mesh wireless devices, inclusive of a maximum of 8 battery-powered keypads, is permitted per room.
Note: A single ZUMMESH-AVBRIDGE is required per room to enable one or more ZUMMESH-KPAVBATT keypads in the room.
Battery: (1) CR2032 3 Volt lithium coin cell disposable battery (included)
Battery Life: ≥5 years
Temperature: 32° to 104° F (0° to 40° C)
Humidity: 10% to 90% RH (non-condensing)
Composition: Plastic; almond, black, white, gray, or red smooth finish
Surface Mounting: Adheres to a smooth, flat wall surface using double sided tape (included) or screws (not included)
Wall Box Mounting: Mounts to a 1-gang (or larger) electrical box
Faceplate: Requires a decorator-style faceplate (sold separately)
Height: 4.26 in (109 mm)
Width: 1.76 in (45 mm)
Depth: 0.42 in (11 mm)
2.3 oz (65 g)
UL Listed for US & Canada, IC, FCC Part 15 Class A digital device